14
Use of the menus
14
‘Dolby’ ‘Pro Logic’ and the double-D symbol
are trademarks of Dolby
Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories Licensing Corporation.
*
With extra loudspeakers connected
The contents of the Surround settings menu depends on the extra
speakers/amplifiers connected and on the configuration settings selected in
the Setup menu. See Connect Peripheral Equipment, Extra loudspeakers, p. 27
and Install TV Setup, p. 7.
If no extra front or rear speakers are connected do not change the predefined
factory settings of Extra Front and Rear speakers.
Note: you can select only those surround modes which can be used with the
broadcasted signal.
The graphical representation of the speakers is displayed on screen when
controls are being changed or when in test tone mode.
The drawing on screen is updated according to the chosen setup and the
selected surround mode. Speakers which are active are highlighted.
In 3D surround mode the graphical representation of the rear loudspeakers is
replaced by the symbol
®r
.The menu item 3D effect appears and the level
of the 3D effect can be adjusted.
With two extra rear surround loudspeakers connected
The menu item Test which only appears in Dolby 3 Stereo, 3D Surround
mode or Pro Logic, enables you to have a reference of the internal and the
rear loudspeakers loudness.
&
Select
Dolby 3 Stereo
,
3D Surround
or
Pro Logic
.
é
Select
Test start
and press the
OK
key.
A steady noise tone is switched sequentially through the available
loudspeakers, for 2 seconds each.This enables you to have a reference of the
loudness of each loudspeaker.
The loudspeakers activated light up in the screen graphic.
“
Select
Centre volume
,
Balance
or
Rear volume
and alter the selected
adjustments.
‘
Select
Test stop
and press the
OK
key when you have finished the
adjustments of the speaker levels.
Surround settings
Test start
Test stop
Centre volume
Balance
Rear volume
3D effect
Surround mode
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Available menu items in case of the selected
and available Surround modes.
Stereo
3D surround
Pro Logic
Dolby 3 Stereo
Hall
Surround settings
Test start
Test stop
Centre volume
Balance
Rear volume
3D effect
Surround mode
4914.1 gb /05 12-01-2000 10:38 Page 14
