&
Place the TV on a solid surface.
For ventilation, leave at least 5 cm free all around the TV.
Do not place the TV on a carpet.
To prevent any unsafe situations, do not place any objects on top of the TV.
Avoid heat, direct sunlight and exposure to rain or water.
é
Insert the aerial plug
firmly into the aerial socket
x
at the back of
the TV.
“
Connect the two Surround Sound rear loudspeakers supplied to the
connector clips at the back of the TV. Always connect both Surround Sound
loudspeakers: the left rear loudspeaker at
REAR L
; the right rear loudspeaker
at
REAR R
.
Push the connector clip down and insert the end of the wire into the opening: the
positive wire (the one with the black line) to the red loudspeaker connection; the
negative wire to the black loudspeaker connection. Do not insert the wires too far.
The Surround Sound loudspeakers should always be located behind or to either side
of the listener. If preferred you can also hang the loudspeakers on the wall.
‘
Insert the mains plug
in the wall socket having a mains voltage of 220V-
240V.
To prevent damaging the mains (AC) cord which could cause a fire or electric
shock, do not place the TV on the cord.
(
Remote control: Remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type R6-1,5V).
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries exhausted batteries may not be disposed of with
your household waste. Please check on how to dispose of exhausted batteries
according to local regulations.
Note: this remote control functions with TVs which use the RC6 signalling standard.
§
Switch the TV on :
Press the power switch
A
on the front of your TV.
A green indicator on the front of the TV lights up and the screen comes on.
If the indicator is red, press the
- P+
key on the remote control.
The green lamp blinks every time you press a key on the remote control.
When you switch on your set
for the first time
, the menu
LANGUAGE
automatically appears on the screen. The explanation appears in different languages
one at a time. Choose your own language and press the
OK
key on the remote
control.
Go on to page 4.
3
Preparation
Preparation
CABLE
R6 / AA
R
L
REAR
