14
Poor reception
The proximity of mountains or high
buildings may be responsible for
ghost pictures, echoing or shadows.
In this case, try manually adjusting
your picture: see "fine tuning" (p.6) or
modify the orientation of the outside
aerial. Does your antenna enable you
to receive broadcasts in this
frequency range (UHF or VHF band)?
In the event of difficult reception
(snowy picture) switch the
NOISE.REDUCT on the FEATURES
menu to ON. (p. 7).
No picture
Have you connected the aerial socket
properly? Have you chosen the right
system? (p. 6) Is the contrast or the
brightness baddly adjusted ? Press
and readjust the PICTURE
menu. Poorly connected
euroconnector cables or aerial
sockets are often the cause of picture
or sound problems (sometimes the
connectors can become half
disconnected if the TV set is moved
or turned). Check all connections.
Picture adjustment
If the picture is not adjusted properly
or if you have trouble obtaining a
clear picture, select one of the smart
control presets
(p. 3), go into
the PICTURE menu and modify one
of the settings.The setting is stored
automatically.The picture is too blue
or too red! Adjust the COLOUR
TEMP (p. 7).
Peripheral equipment gives a black
and white picture
You have not selected the right
socket with the
key: S-VHS2(or
S-VHS3) instead of EXT2 (or EXT3).
To play a video cassette, check that it
has been recorded under the same
standard (PAL, SECAM, NTSC) which
can be re p l ayed by the video re c o rd e r.
No sound
If on certain channels you re c e i ve a
p i c t u re but no sound, this means that
you do not have the correct TV system.
Modify the SYSTEM setting (p. 6 ) .
Remote control
The TV set does not react to the
remote control; the indicator on the
set no longer flashes when you use
the remote control? Replace the
batteries.
Standby
When you switch the TV set on it
remains in standby mode and the
indication LOCKED is displayed
when you use the keys on the TV set?
The LOCK function is switched on
(see p. 7).
If the set receives no signal for 15
mins, it automatically goes into
standby mode.
The set consumes energy when it is
switched on.To save electricity, we
recommend that you switch the TV
set off using the ON/OFF key.
Miscellaneous
The menus appear in a foreign
language? Select the LANGUAGE
option in the INSTALL menu (p. 4).
Still no results?
If your TV set breaks down, never
attempt to repair it yourself: contact
your dealer's after-sales service.
Recycling directive
Your TV set uses materials which are reusable or which can be recycled.
To minimise the amount of waste in the environment, specialist
companies recover used sets for dismantling and collection of reusable
materials (consult your dealer).
Tips
