Philips 28DW6734, Руководство пользователя

Страница: 28 / 32

26
External loudspeakers
Surround loudspeakers
FM cordless surround speaker system
(only available on certain models)
For improved sound, you can connect 2 external L and R
loudspeakers in the place of the left and right loudspeakers
on the TV set.
Connect as shown opposite and then switch off the internal
loudspeakers on the TV set. (button in the
c
position)
The impedance of the loudspeakers must be between 8 and 16
Ohms.
Connect the 2 Surround loudspeakers as illustrated opposite.
The loudspeakers should be located at the rear or on either
side of the listening zone (always connect 2 loudspeakers).
Certain models are equipped with 2 FM cordless surround
speakers:
• one is the active loudspeaker, including the RF receiver, a
power switch, the mains supply, a channel selector, a
connector clip and a cinch connector.
• the other is passive and has to be connected to the active
loudspeaker.
æ
Set the slide channel switch (1) to channel 6 (default value).
Â
Set the CORDLESS item of the FEATURE menu to channel
6 (see page 20).
ê
Connect the active to the passive loudspeaker with the
supplied speaker cable (2).The Surround speakers should
always be located behind or to either side of the listener.
Remark: people moving around close to the TV may disturb the
sound transmission.The maximum distance between the TV and
the surround speakers should not exceed 15 m (and 6 m
between the active and the passive speakers). In case the
wireless transmission is disturbed or not possible, you can make
a wired connection between the TV and the active speaker.
®
Connect the active speaker to the mains with the supplied
cable (3).
†
Switch on the active speaker with the
POWER
switch (4).
The green LED of the active speaker shows that there is a
t r a n s m i s s i o n .The red LED is on when the speaker is in standby.