CABLE TUNING (OFF / ON)
SETUP
CONSUMER
FEATURES MENU
Your Philips television can be configured to operate in either Cable TV or broadcast / off-air tuning modes. In other
words, the TV must be configured depending upon whether a a Cable TV signal or a normal antenna signal is applied
to its 75-ohm ANT/CABLE plug.
With the Menu onscreen, press the Menu button repeatedly , or use the Cursor Up and Down buttons, to select CABLE
TUNING with the TV's highlight control bar. Press the Cursor Right or Left button on the remote to select:
ON if you DO have Cable TV connected to the TV. Channels 1-125 may then be selected. Or, select OFF if you have
an Antenna connected to the TV, and then only channels 2-69 may be selected. Press STATUS/EXIT to remove the
on-screen menu.
27ST220L
7
BRIGHTNESS, COLOR, CONTRAST, SHARPNESS, TINT
SETUP
CONSUMER
FEATURES MENU
Use the cursor-up and cursor-down buttons to select the picture parameter you wish to adjust. Use cursor left (<-)
and cursor right (+>) to adjust the picture parameter.
NOISE REDUCTION (ON/OFF)
SETUP
CONSUMER
FEATURES MENU
This feature reduces video noise in the displayed picture. Effectively reduces noise while having maximum peaking
in the bright parts of the picture. Differs from reducing Sharpness (see
Sharpness
) in that noise is reduced, but pic-
ture detail is preserved.
AVL (ON / OFF)
SETUP
CONSUMER
FEATURES MENU
Automatic volume leveling restricts the volume variation of audio signals to a relatively small range by boosting
low-level signals and reducing louder signals, thus maintaining a consistent volume level. Use cursor left (<-) and
cursor right (+>) to turn this feature on and off.
H
OW
T
O
U
SE
T
HE
O
N
-S
CREEN
M
ENU
(C
ONTINUED
)
Содержание 27ST220L
Страница 1: ...Instruction Manual EN Monitor 27ST220L ...