34
EN
•
[Enable Subtitles]
:
Enables or disables the use of subtitles in
a DVB broadcast channel:
[Off]
: No subtitles services available
(Prison Mode)
[On]
: Subtitles services available
[Power settings]
•
[Power on]
: The power on function
allows the TV to enter a
specific
mode
(
[On]
or
[Standby]
) of operation when
the mains power is activated
(cold start)
:
[On]
: The TV will always turn on (show
startup channel) after the mains power
is activated.
[Standby]
: When set, the TV will always
turn to standby
(status as defined in
Low power standby option) after the
mains power is activated.
•
[Low power standby]
:
The
Low power standby option defines
the TV to enter a
specific standby mode
after pressing the On/Off button on the
remote control. To wake-up the TV both
On/Off button on the RC or TV can be
pressed:
[Fast]
: The TV will quickly turn on
(show startup channel.
(This mode is
having more power consumption than the
Green mode).
[Green]
: The TV will slower turn
on (show startup channel) then the
Fast.
(This mode is having less power
consumption than the Fast mode).
•
[Smart power]
:
The power consumption for the Smart
power mode is
defined
by the Standard
Smart Picture setting in the TV Setup
part.
[Off]
: The TV will start with Standard
Smart Picture setting, but the setting
can be changed in the guest setup
mode.
[On]
: The TV will start with Standard
Smart Picture setting and Smart Picture
setup is not selectable in the guest
setup mode.
[Clock settings]
•
[Display Standby]
: Define
the brightness
level for the Clock LCD backlight if the TV
is in Standby mode:
[Set]
: Off, 1, 2, 3, 4, 5
•
[Display On]
: Define
the brightness level
for the Clock LCD backlight if the TV is in
On mode:
[Set]
: Off, 1, 2, 3, 4, 5
•
[Time Setting]
: This is only available if the
Time Download is set to Manual and can
be used to set the clock with the remote
control:
[Set]
: Time
entry field [xx:xx Hr]
Time to be set by using arrow keys and numeric buttons
•
[Time Download]
: Select source for clock
time:
[Automatic]
: During cold start the
Clock time is retrieved from the
Download Program channel before
displaying the tuned channel.
During a ‘going to Standby cycle’, the
clock time is updated as well.
[Manual]
: The clock time is set using
the Time Setting option.
[Country dependent]
: During cold
start the Clock time is retrieved from
the Download Program channel before
displaying the tuned channel, and
country dependent settings are made
(UTC+LTO). During a ‘going to Standby
cycle’, the clock time is updated as well.
•
[Download Program]:
Select the
programme where time downloading
must be performed.
•
[Time Offset]
: Offset time added to the
downloaded clock time:
[Slider]
: -12 to 12 hr
•
[Buzzer Volume]
: Volume level of the
Clock Time Alarm level:
[Set]
: Off, Low, High
