36
EN
PBS settings
[PBS mode]
Enables / disables the Professional mode.
[On]:
All settings in the Professional
mode Setup menu are in effect.
[Off]:
The TV operates as a normal
(consumer) TV.
[Consumer setup]
A shortcut to enter the full TV menu. This
allows the installers to do all the TV setup
settings.
[Room ID]
Sets the room ID.
[Channel setup]
A shortcut to enter the channel list, and an option
to change order, rename and hide channels.
[USB to TV]
Loads the TV configuration data (including the
video, audio, channel table, and Professional
mode settings) from a USB device to the TV set.
[TV to USB]
Loads the TV configuration data (including the
video, audio, channel Table, and Professional mode
settings) from the TV set to a USB device.
[Reset]
Selects
[Yes]
to reset all settings in Professional
mode to factory default.
Switch on setting
[Max volume]
This option specifies the maximum allowable
volume level of the TV.
[Switch on channel]
When the guest switches the TV on, it will play at
the specified channel.
[Switch on vol]
When the guest switches the TV on, it will play at
the specified volume level.
[Switch on picture format]
Sets available picture format when the TV is
switched on.
[Power on]
The power on function allows the TV to enter a
specific mode (
[On]
,
[ Standby]
, or
[Last status]
)
of operation after the mains power is activated.
[On]:
When set, the TV will always
turn on after the mains power is
activated.
[Standby]:
When set, the TV will
always turn to standby after the mains
power is activated.
[Last status]:
When set, the TV will
always turn to the last status (either
On or Standby) whenever the mains
power is activated.
[Smart power]
Adjusts the picture backlight to achieve the
following power saving mode.
[Off]:
Smart power is disabled.
[On]:
Smart power is enabled.
(
[Custom]
mode is applied).
Note
•
If the picture format is not supported with the activated
source,
[Auto format]
detection is applied.
