Philips 247E3LHSU/00, Руководство по обслуживанию

Страница: 116 / 119

!
116 Meridian 3
Transportation request for China and India
A. Container loading for China and India
B. Truck loading
Transportation request for EU
A. Land 45‘ Truck and Trailer (800X1200mm pallet)
B. Land 45‘ Truck and Trailer (1000X1200mm pallet) for UK
Location of Control icons -
Per Philips Graphic sheet
Color for resin/paint -
Per Philips make-up sheet
Fire enclosure request
Shielding Cover should fulfill international standard
Resins
x
RoHS required
x
WEEE required.
x
Resin type/selection refer to Project Book Section 7.2 Plastic material.
If paint is used
x
RoHS required
x
WEEE require
x
If new painting type need to implement, refer to UN-D 1235.
Plastic mold tooling
x
Tooling to be designed to minimize cosmetic defects induced by molding process (sink, blush, weld
lines, gate marks, ejector marks, etc.). Refer to “TYV61-90007”.
x
Painting to cover up cosmetic defects due to molding is strongly discouraged.
x
China RoHS mark requested.
Plastics flammability
x
All Plastics to be Flame Retardant UL 94-HB or Better.
x
Base / Pedestal to be Flame Retardant UL 94-HB.
x
All major plastic parts (bezel, back cover) need to be molded from same resin.
x
Plastic resin type selection should be referred to “plastic-Philips Pool monitor”.
Texture/Glossing of housing
x
The texture area and texture no should follow Philips make-up sheet.
x
The exterior surfaces shall have a uniform texture.
x
Philips must approve the mold texturing.
x
Detail document for texture refer to “UN-D249”, “UN-D 600”.
x
< = 20 gloss units