Mechanical Instructions
4.
Figure 4-2 Rear cover removal [1/4]
Figure 4-3 Rear cover removal [2/4]
Figure 4-4 Rear cover removal [3/4]
Figure 4-5 Rear cover removal [4/4]
4.3.2
Small Signal Board (SSB)
Refer to
Caution: it is mandatory to remount all different screws at their
original position during re-assembly. Failure to do so may result
in damaging the SSB.
1.
Release the clips from both the LVDS cables/Flat Foils
connectors that connect to the SSB [1].
Caution: be careful, as these are very fragile connectors!
2.
Release the clamps and unplug all other connectors [2].
3.
Remove all fixation screws [3] from the SSB.
4.
Take out of the SSB. Refer to
for details.
Figure 4-6 SSB removal
4.3.3
Power Supply Unit (PSU)
Caution: it is mandatory to remount all different screws at their
original position during re-assembly. Failure to do so may result
in damaging the PSU.
1.
Unplug power connector from the SSB.
2.
Unplug all other connectors from the PSU.
3.
Remove all fixation screws from the PSU.
4.
The PSU can be taken out of the set now.
19190_101_110913.eps
110913
M3 × 8
3
3 × 8
3 × 16
2
4
2
2
2
2
3
4
3
18860_105_100428.eps
100428
Pull up
Push down
18860_106_100428.eps
100428
18860_107_100428.eps
100428
Pull up
Push down
19190_102_110901.eps
110926
3
3
3
3
1
2
