Philips 202P4, Руководство по обслуживанию

Страница: 105 / 121

97
9
Go to cover page
General Troubleshooting Guide
202P4 M25P
OK
END
NO
Picture distortion
(Geometry)
YES
: Reset monitor to factory preset via OSD menu maniputlation.
: Change monitor timing to work at the recommanded resolution .
Some type of magnetic or electrical interference typically causes poor geometry
in the picture and is not normally a defective monitor.
Try the monitor in another physical location before suspecting the monitor itself.
Tip : *****
The best way to understand "Image control features (by "On Screen
Display" or "Front Control Knob") is to minimize and maxmize each
control feature while viewing a full image on the screen. By
performing this, the customer will immediately understand:
1. How "Image control features" effect the image.
2. How to use "Image control features" to optimize the image.
Access the Geometry Menu in the "On-Screen-Display" (or
"Front Control") of the Monitor. Perform necessary adjustments.
Find out the specific "Image problem"
1. H or V size
2. H or V position
3. Geometry
a. Pincushion
b. Balanced
c. Trapezoid
d. Parallelogram
e. Tilt
H or V size H or V position
Geometry
problem
Optimize with Image
feature controls
END
Is picture displayed
normally?
YES
It is need to check and
repair the monitor.
Is the control
available ?
YES
NO
5