Philips 202E1SB2/69, Руководство по обслуживанию

Страница: 3 / 83

202E1SB2 LCD 3
Technical Data
CMO
Type NR. : CMO M200O1-L07
Resolution : 1600x900
Outside dimensions : 462.8(H) x 272(V) x 10.4(D) mm(Typ.)
Pitch (mm) : 0.2768mm x 0.2768mm
Color pixel arrangement
: 1600 horiz. by 900 vert. Pixels. RGB
stripe arrangement
Display surface
: Hard coating (3H), Anti-glare treatment
of the front polarizer
Color depth : 16.7M colors
Backlight : 2 CCFL
Active area (W x H) : 442.8(H) × 249.075(V) mm
View angle (CR>=10) : 45/45 Right/Left (Typ)
: 35/35 Up/Down (Typ)
Contrast ratio : >=700:1 (Typ)
White luminance : 200 cd/m2(Typ. Center 1 point)
Color gamut : >=72%
Response time : 5 ms (Typ)
Scanning frequencies
Hor. 30 – 83 K Hz
Ver. 56 - 76 Hz
Video dot rate
< 205 MHz (analog), EDID: 170 MHz
< 165MHz (digital), EDID: 170 MHz
Power input
: 90-264 V AC, 50-60
r
3 Hz
Power consumption Normal on: < 33 W (max),
Functions:
(1) D-SUB analog R/G/B separate inputs, H/V sync separated,
Composite (H+V) TTL level, SOG sync
(2) DVI digital Panel Link TMDS inputs
A mbient temperature: 0
q
C - 40
q
C
Power input connection
Power cord length : 1.5 M
Power cord type : 3 leads power cord with protective earth plug.
Power management
The monitor must comply with the Microsoft On Now specification,
and meet EPA requirements.
Mode HSYNC VSYNC Video Pwr-cons. Indication Rec.
time
Power-On On On active < 33 W
Max
30W typ
EPA 5.0:
White LED --
White LED
blinking
Power
Saving
Off Off blanked < 0.8W
3 s
on
and
3s of
Power Off
ʳ ʳ
N/A < 0.5W LED Off
ʳ
PIN No. SIGNAL PIN No. SIGNAL
1 Red 9 DDC +3.3V or +5V
2 Green/ SOG 10 Logic GND
3 Blue 11 Sense (GND)
4 Sense (GND) 12 Bi-directional data
5 Cable Detect (GND) 13 H/H+V sync
6 Red GND 14 V-sync
7 Green GND 15 Data clock
8 Blue GND ʳ ʳ
Susceptibility of display to external environment
Operating
- Temperature : 0 to 40 degree C
- Humidity : 20~90% max
- Altitude : 0-10000 ft
- Air pressure : 600-1100 mBAR
Storage
- Temperature : -20 to 60 degree C
- Humidity : 10~90% max
- Altitude : 0-30000 ft
- Air pressure : 300-1100 mBAR
Note: recommend at 5 to 35
q
C, Humidity less than 60 %
Pls also refer to DQE requirements
Pin No. Description
1 T.M.D.S. data2-
2 T.M.D.S. data2+
3 T.M.D.S. data2 shield
4 No Connect
5 No Connect
6 DDC clock
7 DDC data
8 No Connect
9 T.M.D.S. data1-
10 T.M.D.S. data1+
11 T.M.D.S. data1 shield
12 No Connect
13 No Connect
14 +5V Power
15 Ground (for +5V)
16 Hot plug detect
17 T.M.D.S. data0-
18 T.M.D.S. data0+
19 T.M.D.S. data0 shield
20 No Connect
21 No Connect
22 T.M.D.S clock shield
23 T.M.D.S. clock+
24 T.M.D.S. clock-