Philips 200PW8ES/00 Скачать руководство пользователя страница 63

Страница: 63 / 84

HUDSON 8

5.7Resins

RoHS required

WEEE required.

Resin type/selection refer to Project Book Section 7.2 Plastic material.

5.8 If paint is used

RoHS required

WEEE require

If new painting type need to implement, refer to UN-D 1235.

5.9 Plastic mold tooling

Tooling to be designed to minimize cosmetic defects induced by molding process (sink, blush, weld
lines, gate marks, ejector marks, etc.). Refer to "TYV61-90007".

Painting to cover up cosmetic defects due to molding is strongly discouraged.

China RoHS mark requested.

5.10

Plastics flammability

All Plastics to be Flame Retardant UL 94-V0 or Better (if monitor weighs less than 18kg; UL94-V0 is
OK).

Base / Pedestal to be Flame Retardant UL 94-HB.

All major plastic parts (bezel, back cover, base) need to be molded from same resin.

ABS V0 is allowed to implement in China region for monitor body major plastic parts (bezel, back
cover, base).

Plastic resin type selection should be referred to "TY R83-2-9002-1".

5.11

Texture/Glossing of housing

The texture area and texture no should follow Philips make-up sheet.

The exterior surfaces shall have a uniform texture.

Philips must approve the mold texturing.

Detail document for texture refer to "UN-D249", "UN-D 600".

High Adjustment : 130mm

Portrait Display : -1

5.13

Must meet Kensington_slot.spec "TYE-M0004".

MMD request metal plate in Kinsington hole.

5.14

Label

Regulatory label / Carton label should follow Philips requirement.

China RoHS label

Detail document refer to Philips Engineering Reference Book.

5.15

Product dimension / Weight (Refer to SHT 191 )

Unit dimension : 483mm (W) * 402mm(H) * 215mm(D)

Packed unit dimension: 579mm(W) * 513mm(H) * 267 mm(D) for WW

: 579mm(W) * 513mm(H) * 267 mm(D) for China

Net weight

: 8.6Kg (Including I/F cable 240 g)

5.16

Transportation standards refer to TYE-M0002.

5.16.1

Transportation packages

Packaging and wrapping shall be sufficient to protect the product against damage or loss

during shipment from the supplier to the destination specified in the purchase order. All

packaging materials are subject to test and evaluation per TYE-M0002. The cushion material

shall be constructed using EPS material.

5.16.2

Transportation Test

The overall test refer to TYE-M0002.
Vibration, drop test should be performed at ambient temperature(20° C to 23

C) and relative humidity

(40% to 65% ).

BRAND : PHILIPS

20 inch LCD Monitor

TYPE

:200PW8

2007-11-23

590

2007-11-23

GENERAL PRODUCT SPECIFICATION(Continued)

http://www.wjel.net

Содержание 200PW8ES/00





















































































Результаты поиска

Содержание 200PW8ES/00

Отзывы:

Похожие инструкции для 200PW8ES/00

Бренды по названию

Популярные бренды

Philips 200PW8ES/00, Руководство по обслуживанию

Результаты поиска

Содержание 200PW8ES/00

Отзывы:

Похожие инструкции для 200PW8ES/00

Бренды по названию

Популярные бренды