Philips 200PW8ES/00, Руководство по обслуживанию

Страница: 18 / 84

18
DDC Instructions
HUDSON 8
Step 3: Modify DDC data (verify EDID version, week,
year)
Click (new function) icon from the tool bar, bring up
Step 1 of 9 as shown in Fig. 14 .
EDID46 DDC application provides the function selection and
Step 4: Modify DDC data (Monitor Serial No.)
1. Click Next , bring up Fig. 15.
3. Click OK button to confirm your selection.
4. Click icon (Read EDID function) to read DDC EDID data from
monitor. The EDID codes will display on screen as shown in Fig. 13.
2. Select the DDC2Bi as the communication channel.
As shown in Fig. 12.
Fig. 12
Fig. 13
Fig. 14
Step 2: Read DDC data from monitor
1. Click icon as shown in Fig. 11 from the tool bar to bring up
the Channels "Configuration Setup" windows as shown in Fig. 11.
Click this button
=====>
Fig. 11
Re-programming Analog DDC IC
Step 1: After initialize alignment box, connecting all
cables and box as shown in Fig. 10
.
(unplug the 15th pin of
the D-SUB cable connecting with monitor)
Unplug the 5th pin of D-SUB cable connecting with monitor
1= P ower connector
2=D-SUB connector
P C
T
o
printer
port
(
L
T
P
1)
DC P ower
8-12 V
P rinter
P ort
To
M onitor
To P C
1
2----->
----->
To P C V ideo port (D-sub)
Fig. 14
Select and fill out,
If necessary.
http://www.wjel.net