Philips 17S1AB, Руководство по обслуживанию

Страница: 15 / 85

17S1AB LCD 15
FAQs (Frequently Asked Questions)
General FAQs
Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'?
A: Recommended resolution for Philips 17": 1280x1024 @60Hz.
1. Unplug all cables, then connect your PC to the monitor that you used previously.
2. In the Windows Start Menu, select Settings/Control Panel. In the Control Panel Window, select the Display icon.
Inside the Display Control Panel, select the 'Settings' tab. Under the setting tab, in box labeled 'desktop area',
move the slidebar to 1280x1024 pixels (17").
3. Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK.
4. Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1280x1024@60Hz (17").
5. Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor.
6. Turn on your monitor and then turn on your PC.
Q2: What does the recommended refresh rate for LCD monitor?
A:Recommended refresh rate in LCD monitors is 60Hz, In case of any disturbance on screen, you can set it up to 75Hz to
see if that removes the disturbance.
Q3: What are the .inf and .icm files on the CD-ROM? How do I install the drivers (.inf and .icm)?
A:
These are the driver files for your monitor. Follow the instructions in your user manual to install the drivers. Your
computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when you first install your monitor. Follow the
instructions to insert the ( companion CD-ROM) included in this package. Monitor drivers (.inf and .icm files) will be
installed automatically.
Q4: How do I adjust the resolution?
A:
Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired
resolution under Windows® Control Panel with the "Display properties"..
Q5: What if I get lost when I am making monitor adjustments?
A:
Simply press the OK button, then select 'Reset' to recall all of the original factory settings.
Q6: Will the LCD screen be resistant to scratches?
A:
In general it is recommended that the panel surface is not subjected to excessive shocks and is protected from sharp or
blunt objects. When handling the monitor, make sure that there is no pressure or force applied to the panel surface
side. This may affect your warranty conditions.
Q7: How should I clean the LCD surface?
A:
For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl alcohol. Do not use other
solvents such as ethyl alcohol, ethanol, acetone, hexane, etc.
Q8:Can I change the color setting of my monitor?
A:
Yes, you can change your color setting through OSD control as the following procedures,
1. Press "OK" to show the OSD (On Screen Display) menu
2. Press "Down Arrow" to select the option "Color" then press "OK" to enter color setting, there are three settings as below.
a. Color Temperature; The six settings are 5000K, 6500K, 7500K, 8200K, 9300K and 11500K. With settings in the 5000K
range the panel appears ‘warm,' with a red-white color tone, while a 11500K temperature yields ‘cool, blue-white toning."
b. sRGB; this is a standard setting for ensuring correct exchange of colors between different device (e.g. digital cameras,
monitors, printers, scanners, etc)
c. User Define; the user can choose his/her preference color setting by adjusting red, green blue color.
*A measurement of the color of light radiated by an object while it is being heated. This measurement is expressed in terms
of absolute scale, (degrees Kelvin). Lower Kevin temperatures such as 2004K are red; higher temperatures such as 9300K
are blue. Neutral temperature is white, at 6504K.