background image

16

17

ENGLISH

 

-This will occur when the appliance is moved for 

5 minutes without switching it on. The razor will  

automatically go into power-saving mode. 

C

 

  The lock symbol blinks on the display to 

indicate the appliance is in power-saving mode.  

 

-To deactivate the power-saving mode, simply

        press the on/off button. 

Charge Meter

 

  Charge Meter monitors amount of remaining 

battery power (Models 1260X, 1250X and 

1250XCC) and actual shaving ‘minutes left’ 

(Models 1290X, 1280X and 1280XCC). 

‘Minutes left’ or remaining battery capacity 

is based on the amount of power consumed 

shaving per minute and is dependent upon 

your skin and beard type, whether you use 

pre-shave lotion, and how often the trimmer 

is used.

 

  Initially your razor may need to go through 2 

or 3 full charge/recharge cycles before 

‘minutes left’ (Models 1290X, 1280X and 

1280XCC) or remaining battery capacity 

indicators (Models 1260X, 1250X and 

1250XCC) begins to display your accurate 

shaving minutes or battery power left.

Before First Use

  

  Charge the razor before you start using it 

(see ‘Charging’).  Make sure the razor is  

ENGLISH

 

switched off before you start charging it.

 

  Remove any sticker or protective foil from 

the Display before using razor. 

Important

 

  Only use the power cord and charging stand 

or Jet Clean System (models 1280XCC and 

1250XCC only) provided to charge the razor.

 

  The power plug transforms 100-240V AC to 

less than 24V DC.

Travel Lock (1280X, 1280XCC, 1260X, 

1250X and 1250XCC)

The razor is equipped with a travel lock function.  

You can use the travel lock function when you are 

going to store the razor for a longer period or if 

you are going to take the razor with you when 

traveling.  See ‘Travel Lock’ section for instructions 

on how to use this function.

Charging

 

  Charging, recharging or storing at 

temperatures below 40ºF or higher than 95ºF 

adversely affects lifetime of batteries.

 

  Always unplug this charging stand/Jet Clean 

System from the electrical outlet immediately 

after use, except when razor is (re)charging.  

You can store the razor in the charging stand 

or Jet Clean System. 

MINUTES LEFT

MINUTES LEFT

Содержание 1250X/40























Отзывы: