ENGLISH
◗
Never clean, remove or replace shaving unit
while motor is on.
◗
Do not apply pressure to shaving head combs.
Do not touch razor heads with hard objects
as this may dent or damage precision-made
slotted combs.
◗
Do not use razor if shaving head combs are
damaged or broken. Facial injury may occur.
◗
Do not use abrasives, scourers or aggresive
liquids such as gasoline or acetone to clean
the razor or Jet Clean System.
Cleaning the Shaving Unit
The razor heads may be quickly cleaned after
each use by rinsing with hot water. Water from
the tap should be on a hot setting, BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
◗
Regular cleaning guarantees better shaving
results.
◗
While rinsing razor heads, water may drip
out of the base of razor. This is a normal
occurrence.
1
Always turn razor OFF, remove from
charging stand/Jet Clean System before
cleaning.
C
2
Rinse the shaving unit by running under
hot water for a few minutes.
26
ENGLISH
C
3
Using your thumb and forefinger, grasp the
sides of the shaving head near the center
of the shaving unit and pull each individual
shaving head open.
C
4
Rinse all three shaving heads and three
hair chambers under hot tap water by
letting the water run in and around all the
openings for at least 30 seconds.
BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
5
You can also brush the shaving heads and
hair chambers with the brush supplied.
6
Carefully shake off excess water and leave
the shaving heads open to dry the shaving
unit completely.
NOTE: Do not wipe or dry the shaving unit with
a towel or tissue. This could damage the shaving
heads.
C
7
Press each shaving head back onto the
shaving unit. You will hear a ‘click’.
27
C
F
C
F
