17” CDT Color Monitor 107S7
77
2.7.3 LED indicator
•
Normal on -
Green.
•
Active off -
Green Blinking (1sec on / 1sec off).
•
Switch off -
Blank.
2.7.4 Monitor status information
•
Self-test feature -
“CHECK SIGNAL CABLE” message appears when video cable
is
disconnected.
•
Out of scan range -
“FREQUENCY IS OUT OF RANGE” appears when input H-sync
or V-sync out of range.
•
Resolution & H/V input -
Shown in OSD menu “EXTRA CONTROLS”.
2.7.5 Power connector
•
AC socket 3-pin IEC-320-C13, at rear side.
2.7.6 Video input connector/Video cable
•
1.5m non-detachable fly-in video cable with D-Sub 15 pin male blue connector, pin assignment of D-Sub:
Pin
Function
1 Red
video
2 Green
video
3 Blue
video
4 GND
5 Self
test
6 Red
GND
7 Green
GND
8 Blue
GND
9
+5V (Supply from PC for DDC circuit)
10 Sync
GND
11 GND
12 DDC
serial
data
13 H-sync
14 V-sync
15 DDC
serial
clock
•
H-sync line impedance must be within 50 ~ 70
Ω
(TDR measurement).
•
V-sync line impedance should be within 40 ~ 70
Ω
(TDR measurement).
•
RGB signal lines must be 75
Ω
± 5% coaxial.
•
R, G, B coaxial shield must connect to D-Sub metal shell.
Содержание 107S7
