Philips Saeco Exprelia Series, Руководство по обслуживанию

Страница: 46 / 56

EXPRELIA 07 DISASSEMBLY
Saeco International Group Rev. 00 / June 2010 Page / 09
7.10. Coffee boiler
1-2)Unscrew the screws shown
3)Unhook the boiler, disconnect the
electrical and water circuit connections
05
7.11. Gearmotor:
Loosen the screws as
illustrated and remove
the boiler pin
Loosen the screws as
illustrated and remove the
gearmotor cover
The following are located inside the compartment
protected by the casing:
- Electric motor (A) with gears (B) and (C) for transmission
and timing of the dispensing unit
- Dreg drawer presence sensor (D)
- Dispensing head present microswitch (E)
- Microswitch (F) detecting brewing unit home and work
positions
- Remove the gear (C) that meshes with the motor
transmission shaft
- Remove the large gear (B)
- Remove the motor (A), complete with transmission shaft
Loosen the screws as
illustrated and remove the
boiler pin
- (G) Multi-way valve drain
Replace the gear (B), making sure that the imprint of the
arrow is aligned with the opening containing the pin (P).
When replacing the motor and the transmission shaft, make
sure the guide runners (L) are in the right position.
Grease the shaft thoroughly and evenly.