PHILIPS Respironics OmniLab Advanced +, Клиническое руководство

Страница: 23 / 52

19
4.4 Accessing the Setup Screen
1. To access the Setup screen, select Menu from the Standby screen.
2. You can access the device and therapy settings from this screen. The menu options vary based on the device setup.
A sample screen is shown here.
Select
S/T
Navigate
Exit
Settings And Alarms
Options
Alarm Log
Event Log
Information
Menu
1/5
Setup
4.5 Accessing the Monitor Screen
The Monitor screen appears after you press the Therapy key on the Standby screen. There are two versions of this
screen: Simple View and Detailed View. Samples of both screens are shown here.
Simple View: Detailed View:
Ramp
cm
H
2
O
S/T AVAPS: 0.5
0 5 10 15 20 25 30
Menu
A
11/03/2010
06:24 PM
Humidifier Ramp
cm
H
2
O
cm
H
2
O
ml l/min
l/min BPM
S/T AVAPS: 0.5
0 5 10 15 20 25 30
Menu
Pressure
12.1
Vte
0
Leak
0.0
MinVent
0.0
RR
12
I:E Ratio
1:1.0
A
1
Monitor Screen Content
The Monitor screen is divided into several panels, the Monitor panel, Date and Time panel, Patient Accessory panel
(if attached), and the Status panel.
In Simple View, the Monitor screen displays the following:
1. Monitor Panel
• Therapy mode
• Flex or AVAPS (if enabled), display next to the therapy mode, along with the value setting
• Patient breath indicator displays below the therapy mode
• Peak pressure symbol appears on the graph according to the maximum Patient Pressure reached during each breath
• A bar graph displays the current pressure level
• If enabled, alarm status indicators for Audio Pause, Apnea, and Circuit Disconnect display in the upper right corner
2. The Date/Time panel shows the current date and time.
3. The Patient Accessory panel displays when an accessory is connected to the device. See the Accessories section
for more information.
4. The Status panel displays certain symbols that indicate features being used, such as Ramp, as well as battery status.