PHILIPS Respironics InnoSpire Deluxe, Руководство пользователя

Страница: 96 / 99

190 191
ENGLISH
Guidance and manufacturer’s declaration – electromagnetic emissions
The Innospire Deluxe is intended for use in the electromagnetic environment specified below. The customer or the user
of the Innospire Deluxe should assure that it is used in such an environment.
Emissions
Group 1
RF emissions
CISPR 11
The Innospire Deluxe uses RF
energy only for its internal function.
Therefore, its RF emissions are
very low and are not likely to
cause any interference in nearby
electronic equipment.
Compliance Electromagnetic environment – guidance
Class B
RF emissions
CISPR 11
Class A (not applicable for 120v
rated devices)
Harmonic emissions
IEC 61000-3-2
The Innospire Deluxe is suitable for
use in all establishments, including
domestic establishments and those
directly connected to the public
low-voltage power supply network
that supplies buildings used for
domestic purposes.
Complies (applicable to 50Hz
rated devices only)
Voltage fluctuations/flicker emissions
IEC61000-3-3
A. Instructions for use
1.
Innospire Deluxe needs special precautions regarding EMC and needs to be installed and put into service
according to the EMC information provided in this document;
2.
Portable and mobile RF communications equipment can affect Innospire Deluxe.
B. Technical description
1. Warning
that the use of accessories, transducers and cables other than those specified with the exception
of transducers and cables sold by the manufacturer of the Innospire Deluxe as replacement parts for inter-
nal components, may result in increased EMISSIONS or decreased IMMUNITY of the Innospire Deluxe.
2. Warning that the Innospire Deluxe should not be used adjacent to or stacked with other equipment.
3.
Guidance and manufacturer’s declaration – electromagnetic immunity
The Innospire Deluxe is intended for use in the electromagnetic environment specified below. The customer or the user
of the Innospire Deluxe should assure that it is used in such an environment.
Immunity test
±6 kV contact
±8 kV air
±6 kV contact
±8 kV air
Electrostatic discharge
(ESD)
IEC 61000-4-2
Floors should be wood, concrete or ceramic
tile. If floors are covered with synthetic
material, the relative humidity should be
at least 30%.
NOTE U
T
is the a.c. mains voltage prior to application of the test level.
IEC 60601 test level Compliance level Electromagnetic environment – guidance
±2 kV for power
supply lines and
dc lines
±2 kV for power
supply lines and
dc lines
Electrical fast
transient/burst
IEC 61000-4-4
Mains power quality should be that of a
typical commercial or hospital environment.
±1 kV line(s)
and neutral
±2 kV line(s)
to earth
±1 kV line(s) and
neutral
±2 kV line(s)
to earth
Surge
IEC 61000-4-5
Mains power quality should be that of a
typical commercial or hospital environment.
<5 % U
T
(>95 % dip in U
T
)
for 0,5 cycle
40 % U
T
(60 % dip in U
T
)
for 5 cycles
70 % U
T
(30% dip in U
T
)
for 25 cycles
<5 % U
T
(>95 % dip in U
T
)
for 5s
<5 % U
T
(>95 % dip in U
T
)
for 0,5 cycle
40 % U
T
(60 % dip in U
T
)
for 5 cycles
70 % U
T
(30% dip in U
T
)
for 25 cycles
<5 % U
T
(>95 % dip in U
T
)
for 5s
Voltage dips, short
interruptions and
voltage variations
on power supply
input lines
IEC61000-4-11
Mains power quality should be that of a
typical commercial or hospital environment.
If a dips or an interruption of mains power
occurs, the current of the Innospire Deluxe
may be dropped off from normal level, it may
be necessary to use uninterruptible power
supply or a battery.
3 A/m 3 A/m Power frequency
(50/60Hz) magnetic
field
IEC 61000-4-8
Power frequency magnetic fields should be at
levels characteristic of a typical location in a
typical commercial or hospital environment.
4.