background image

Adding to Z-Wave

TM

 Network

There   is   one   tamper   key   on   the   device.   The   tamper   key   can   add,
remove, reset from Z-Wave

TM

 network.

In the first time, add the device into the Z-Wave

TM

 network.  First, 

make sure the primary controller is in the add mode. And then power 
on the device. The device will auto start the SmartStart Inclusion mode.

Notice

: Including a node ID allocated by Z-Wave

TM

  Controller means

Add

”   or   “

Inclusion

”.     Excluding   a   node   ID   allocated   by   Z-Wave

TM

Controller means “

Remove

” or “

Exclusion

”.

Function

Description

Add

1. Have Z-Wave

TM

 Controller entered inclusion mode.

2. Pressing tamper key three times within 1.5 seconds

to enter the inclusion mode.

3. After add successful, the LED will light ON 1 second

Remove

1. Have Z-Wave

TM

 Controller entered exclusion mode.

2. Pressing tamper key three times within 1.5 seconds

to enter the exclusion mode.

3. Node ID has been excluded.

Reset

Notice: Use this procedure only in the event 
that the primary controller is lost or 
otherwise inoperable.

1. Pressing tamper key four times within 1.5 seconds 

and do not release the tamper key in the 4

th

 

pressed, and the LED will light ON.

2. After 3 seconds the LED will turn OFF, after that 

within 2 seconds, release the tamper key. If 
successful, the LED will light ON one second. 
Otherwise, the LED will flash once.

3. IDs are excluded and all settings will reset to 

factory default.

SmartStart

1.

Product has a DSK string , you can key in first five 
digit to increment SmartStart process,or you can 
scan QR code.

Ex:mydsk
10209-46687-52248-13629-04783-07465-15776-56519

2.

SmartStart enabled products can be added into a 
Z-Wave network by scanning the Z-Wave QR Code 
present on the product providing SmartStart 
inclusion. No further action is required and the 
SmartStart product will be added automatically 
within 10 minutes of minutes On in the network 
vicinity.
*notice1:The QR code can be found on the device 
PSE04 or on the box.

Association

This machine provides one groups of nodes. Each 
group can set 1 Nodes.

Group 1 is called Lifeline the device will report :
1.Notification report
2.Sensor multilevel report
3.Device Reset Locally Notification
4.Battery Report
5.Indicator Report

Failed or success in including/excluding the node ID can be 
viewed from Z-Wave

TM

 Controller.

Notice 1:

 Always RESET a Z-Wave

TM

 device before trying to add it to a

Z-Wave

TM

 network. 

4

Содержание PSE04-A










Отзывы: