[Command Class Multilevel Switch, Multilevel Switch Report,
Value = 0x63 (TOP)]
2-3 MULTILEVEL SWITCH START LEVEL CHANGE:
This is the command which user can move the shutter up to the top or down to
the bottom.
[Command Class Multilevel Switch, Multilevel Switch Start Level Change,
Up/Down Value]
2-3.1 Up/Down Bit:
If Up/Down Bit=0x00 Shutter move up
If Up/Down Bit=0x01 Shutter move down
If Up/Down Bit=0x03 no move
[Command Class Multilevel Switch, Multilevel Switch Start Level Change,
Up/Down=0x00] control the shutter to the top (0x63)
[Command Class Multilevel Switch, Multilevel Switch Start Level Change,
Up/Down=0x01] control the shutter to the bottom (0x00)
[Command Class Multilevel Switch, Multilevel Switch Start Level Change,
Up/Down=0x03] Don't move the shutter or stop the moving shutter
ATT. 1. Ignore Start Level
、
Start Level
、
Dimming Duration
、
Inc/Dec
、
Step size can
not be used.
2
.
PAN34 can not control the speed of motor.
3. It may have some distance error caused by motor start up time.
4. If user found the error become significant, you may using S1 or S2 move
shutter to the end or remote move shutter to 0% and 100%, and that will
automatically calibrate this error.
2-3.4
MULTILEVEL SWITCH STOP LEVEL CHANGE:
When receive Multilevel Switch Stop Level change Command PAN34 will stop the
motor.
Z-Wave’s Groups introduction (
Maximum 5 nodes
)
There is only one group called Lifeline
，
there is only 5 nodes for Group1 which sup-
port MULTILEVEL_SWITCH_REPORT
、
METER_REPORT_COMMAND_V3
、
NOTI-
FICATION_REPORT and DEVICE_RESET_LOCALLY_NOTIFICATION.
3-1
Device reset locally notification :
When PAN34 is reset manually, it will send a DEVICE_RESET_LOCALLY_
NOTIFICATION to the nodes of group 1.
3-2 Report the shutter position
：
Every time when user press S1 or S2 and let shutter to move, PAN34 will report the
position status to controller, and at the moving process when change over 10%
PAN34 will send Multilevel Switch Report to Group 1 as well.
Multilevel Switch Report
：
Ex. Report position at 30%
[Command Class Multilevel Switch
，
Multilevel Switch Report
，
Value = 30(%)]
3-3 Meter Command Class
：
7
