Philio PAN34, Руководство пользователя

Страница: 10 / 13

4. Notification Report Command
：
When PAN34 detect Overload, it will send Notification Report to Group1, Notification
_Type = 0x08, Notification State=0x08. When it receive Notification Get command
with Notification Type = 0x08 and the PAN34 not in overload status, it will send Notifi-
cation Report, Alarm Type = 0x08, Notification State=0x00.
When PAN34 detect an overload power, it will send Notification Report to Group1.
[Command Class Notification, Notification Report, Notification Type = 0x08,
Notification State = 0x08 (Overload)]
[Command Class Notification, Notification Report, Notification Type = 0x08,
Notification State = 0x00 (Normal)]
When in Two Push Button switch type, S1 or S2 are closed and not released to open,
and PAN34 receive any control moving command from Z-Wave RF.
5. Z-Wave’s Configuration
Configuration
Parameter
Function Size
(Byte)
Value Unit Default Description
1 Watt
Meter
Report
Period
2 0 -
0x7FFF
5s 720
0:Disable auto Report
1~0x7FFF: 5s ~45
hour
2 External
switch
mode
1 1-2 2
1:
One Push button
2:
Two Push button
3 Total 2 0-6000
0.1
Second
0
0: The time depends
on Moving Range
Calibration
moving
time of
curtain
1~6000: 0.1s~600s
4 Watt
threshold
1 1-5
Watt
1
The threshold is a
judgment for motor
running or not
5 Watt
differential
1 0-1 1
0: It will not report
Watt when change
over 5%
1: It will report watt
value when the
differential is over
5%
6 Timer
offset for
motor
start
running
2 0-255
0.01
second
50
0-255: 0s ~ 2.55s
50 = 0.5s
5-1 Watt Meter Report Period:
If the setting is configured for 1hour (set value =720), the PAN34 will report its instant
power consumption every 1 hour to the node of Group 1. The maximum interval to
report its instant power consumption is 45 hours (5s*32767/3600=45hr). Default
value is 1 hour. If the setting value is 0, the auto report function of meter Watt will be
disabled.
5-2 External switch mode
5-2-1 One Push Button
：
When the configuration setting is One Push Button, only S1 input will be valid.
The control moving commands can be accepted in this switch mode while the
shutter is moving. In this switch mode, the inclusion/exclusion/reset function can
also be fulfilled by pressing S1 just like the operation of include button.
10