Philio Technology Corporation PSP06, Руководство пользователя

Страница: 8 / 9

NO. Name Def.
Vali
d
Description
0 Bit3 : Reserve.
0 Bit4 : Reserve.
0 Bit5 : Reserve.
0 Bit6 : Reserve.
0 Bit7 : Reserve.
4
Basic ON
Level
0xFF All
Setting the BASIC command value.
When the PIR trigger, send the
BASIC CC to the group 2.
5
Delay Send
Basic Off
Timer
1 All
How many timer delay to send basic
off after PIR trigger. Unit : 10
second.
6 PIR Re-trigger
time 10 All After the PIR motion detected,
setting the re-detect time. 1 seconds
per tick, default tick is 10 (Unit : 1
seconds).
Setting the suitable value to prevent
received the trigger signal too
frequently. Also can save the battery
energy.
7 PIR Sensitivity 1 1 ~ 2
PIR sensitivity settings.
1 means the hight sensitivity
2 means the lowest sensitivity
Z-Wave Supported Command Class
Command Class Version Required Security Class
Z-Wave Plus™ Info
2
None
Security
1
None
Security 2
1 None
Supervision
1 None
Transport Service
2 None
Association
2
Highest granted Security Class
Association Group
Information
3
Highest granted Security Class
Device Reset Locally
1 Highest granted Security Class
Firmware Update Meta
Data
5
Highest granted Security Class
Indicator
3
Highest granted Security Class
Manufacturer Specific
2 Highest granted Security Class
Multi-Channel Association
3 Highest granted Security Class
Powerlevel
1 Highest granted Security Class
Version
3
Highest granted Security Class
Configuration
4
Highest granted Security Class
Notification 8 Highest granted Security Class
Battery 1 Highest granted Security Class
8