6
Installation
Infrared heaters are ideal for heating specific areas or zones. They operate by radiating
infrared light that heats the objects and walls in a room and not the surrounding air.
Therefore it is important that your panel is positioned so that the rays of infrared light are
unobstructed and reach as much of the room as possible.
For optimum heating the panel should be mounted at least 1.2m above ground level.
Make sure the surface on which you are
mounting the heater panel is strong enough
to support the weight of the panel.
All walls differ in strength and thickness, use
fixings suitable for your type of mounting
surface to mount the wall brackets.
Fixings are not supplied
consult a suitable
professional for guidance
if you are unsure which
fixings to use.
Step 1.
Measure up the mounting
surface as shown opposite.
Attach the two mounting brackets
securely using appropriate fixings.
Step 3.
Align the panel screws (5) with the corresponding slots
in the two brackets fixed to the wall and slide the panel down
into place ensuring a secure and strong hold.
Step 2.
Assemble the 4 hanging
buttons / washers and M6 x 30
screws as shown below.
5
4
3
M6 x 30 screw
Washer
Hanging
Buttons
Step 4.
Wiring in your infrared heater - this should be done by
a qualified electrician in accordance with IEE wiring regulations
and installations must conform to BS7671 and Part P of the
Building Regulations.
