Philco PTF 8211 BU, Руководство пользователя

Страница: 11 / 60

EN - 9
06/2012 Copyright © 2012, Fast ČR, a. s.
PART 4: SETTING THE TEMPERATURE
The freezer thermostat automatically regulates the inside temperature of the compartments. By rotating the
knob from position 1 to 5, colder temperatures can be obtained. “0” position shows thermostat is closed and
no cooling will be available.
Compressor
indicator light Alarm indicator
light
Power On indicator light
Freezer Thermostat Setting;
0:
The appliance is closed
1-2: For short-term storage of food in the freezer compartment, you can set the knob between minimum and
medium position.
3-4: For long-term storage of food in the freezer compartment, you can set knob to medium position.
4-5: For freezing the fresh food. The appliance will work longer. So after you get the cold condition you must
position to previous position.
SF: Speed freeze function. The compressor starts running a maximum power. The temperature will decline
to the lowest possible temperature. Insert the food you wish to freeze, ideally in the middle drawer. After
freezing the food, set the temperature control knob to the required temperature.
NOTE:
If the SF function is activated the compressor indicator light will be lit orange and the compressor will
start running at maximum power.
Do not forget, that the temperature inside the freezer compartment is also aff ected by ambient temperature,
the temperature of the food placed inside and the number of times the door is opened. If required, change the
temperature setting.
Compressor indicator light: If the compressor is turned on, it is lit orange.
Power On indicator light: As soon as the power cord of the appliance is connected to a power socket, it will
be lit green.
Alarm indicator light: As soon as the temperature reaches a critical point, it will be lit red.
Ice cube tray
To make ice cubes, fi ll the ice cube tray with water and place it inside the freezer compartment of the refrigerator.
After the water has frozen, remove the ice cubes from the tray by twisting the tray in the middle (see picture).
PART 4: SETTING THE TEMPERATURE