Copyright © 2020, Fast ČR, a. s.
Revision 02/2020
EN - 26
6. TROUBLESHOOTING & TRANSPORT
6.1 Troubleshooting
If you still have a problem with your appliance after checking these basic troubleshooting steps, please
contact an authorised service person or qualified technician.
Problem
Possible Cause
Solution
Oven does not switch on.
Power is switched off.
Check whether there is power supplied.
Also check that other kitchen appliances are
working.
No heat or oven does not
warm up.
Oven temperature control is
incorrectly set.
Oven door has been left open.
Check that the oven temperature control knob
is set correctly.
Oven light (if available) does
not operate.
Lamp has failed.
Electrical supply is disconnected or
switched off.
Replace lamp according to the instructions.
Make sure the electrical supply is switched on at
the wall socket outlet.
Cooking is uneven within
the oven.
Oven shelves are incorrectly
positioned.
Check that the recommended temperatures and
shelf positions are being used.
Do not frequently open the door unless you are
cooking things that need to be turned. If you
open the door often, the interior temperature
will be lower and this may affect the results of
your cooking.
The timer buttons cannot be
pressed properly.
There is foreign matter caught
between the timer buttons.
Touch model: there is moisture on the
control panel.
The key lock function is set.
Remove the foreign matter and try again.
Remove the moisture and try again.
Check whether the key lock function is set.
The oven fan (if available) is
noisy.
Oven shelves are vibrating.
Check that the oven is level.
Check that the shelves and any bake ware are
not vibrating or in contact with the oven back
panel.
6.2 Transport
If you need to transport the product, use the original product packaging and carry it using its original case.
Follow the transport signs on the packaging. Tape all independent parts to the product to prevent damaging
the product during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance, especially the external
surfaces of the product, is protected against external threats.
