Copyright © 2020, Fast ČR, a. s.
Revision 02/2020
EN - 8
2. INSTALLATION AND PREPARATION FOR USE
WARNING:
This appliance must be installed by an authorised service person or qualified technician,
according to the instructions in this guide and in compliance with the current local regulations.
• Incorrect installation may cause harm and damage, for which the manufacturer accepts no responsibility
and the warranty will not be valid.
• Prior to installation, ensure that the local distribution conditions (electricity voltage and frequency) and the
adjustments of the appliance are compatible. The adjustment conditions for this appliance are stated on
the label.
• The laws, ordinances, directives and standards in force in the country of use are to be followed (safety
regulations, proper recycling in accordance with the regulations, etc.).
2.1 Installation instructions
General instructions
• After removing the packaging material from the appliance and its accessories, ensure that the appliance
is not damaged. If you suspect any damage, do not use it and contact an authorised service person or
qualified technician immediately.
• Make sure that there are no flammable or combustible materials in the close vicinity, such as curtains, oil,
cloth etc. which may catch fire.
• The worktop and furniture surrounding the appliance must be made of materials resistant to temperatures
above 100°C.
• The appliance should not be installed directly above a dishwasher, fridge, freezer, washing machine or
clothes dryer.
2.2 Installation of the Oven
The appliances are supplied with installation kits and can be installed in a worktop with the appropriate
dimensions. The dimensions for hob and oven installation are given below.
A (mm)
557
min./max. F (mm)
560/580
B (mm)
550
min. G (mm)
555
C (mm)
595
min. H/I (mm)
600/590
D (mm)
575
min. J/K (mm)
5/10
E (mm)
574
