Philco PFL510CLFW3CF, Руководство пользователя

Страница: 2 / 40

▼ START BUTTON:
After having carried out all the operations described in points 1 to 8 in the paragraph
"WASHING CYCLE" press this button and the washing machine will begin its washing
cycle. The relative LED will light up after 2-3 seconds, to indicate that the door is
locked and the program has started.
SM2280
▼
"STOP" ON THE PROGRAM SELECTOR:
The function of stop is to reset the washing machine. If for any reason during the
washing cycle you decide to vary it, or decide later to add more laundry, all you have
to do is turn the knob of the program selector to the "STOP" position, then reset the
knob to the new program chosen and press the "START" button.
GB
USE OF THE WASHING MACHINE
▼
VARIABLE SPIN:
The machine offers a wide choice of spin settings that can be selected before starting
the program. To vary the spin setting just press button (H) until the desired value is
reached (fig. 1); if you wish to exclude the spin, press the button until "00" appears
on the display (fig. 2).
2
Warning!! It is recommended to use this function only if strictly necessary and solely if the program to
be reset has started not more than 3 minutes previously. Before being able to open the door after a reset,
you must wait 2 minutes for it to be unlocked.
▼ DISPLAY AND DURATION OF THE WASHING CYCLE:
With each program selected with the knob (P), the corresponding spin speed and the
duration of the cycle will appear on the display; this time will decrease until it arrives
at zero when the program is finished and "END" appears on the display. At this point
it will be possible to take out the laundry.
N.B. In the "Cotton" programs, the duration of the washing cycle initially shown by the display
can vary, since it can be affected by various factors such as temperature, water inlet pressure
and quantity of laundry loaded in the drum. During the wash, the machine's electronics will
automatically alter the time needed for the cycle set according to these factors, thus achieving
the best performance in the best time.
▼ DELAYED START BUTTON:
The machine is equipped with a function that enables you to delay the wash for up
to a maximum of 16 hours; each time button (I) is pressed, the display will show the
hours to wait from 1...to 16 before the machine begins the washing cycle. When key
(L) is pressed, the washing machine will wait the set number of hours and will then
automatically begin the washing cycle.
Activation of the delay is indicated by the flashing of the dots on the display.
NB. The maximum spin speed will vary according to the model and is indicated
in the technical characteristics table of the washing machine. The maximum
recommended spin speed for each programme is that displayed automatically
when the wash programme is selected.
Out of balance spin protection for the load:
This washing machine is equipped with a special electronic control system for the correct
balancing of the load. Before each spin, the system makes the clothes arrange themselves
in the drum in the most even way possible. In case of irregular distribution of the laundry,
for safety reasons the spin speed is reduced and in cases of the load being greatly out of
balance, the spin cycle will not be effected.
STOP