EN - 31
Copyright © 2016, Fast ČR, a. s.
08/2016
Unsatis
-factory
washing
result
Problem
Possible Causes
What To Do
The dishes are not
clean
The dishes were not loaded
correctly.
See notes in “Loading the Dishwasher Baskets”.
The programme was not
powerful enough.
Select a more intensive programme. See “Wash
Cycle Table”.
Not enough detergent was
dispensed.
Use more detergent, or change your detergent.
Item are blocking the path of
spray arms.
Rearrange the items so that the spray can rotate
freely.
The fi lter combination in the
base of wash cabinet is not
clean or is not correctly fi tted.
This may cause the spray arm
jets to get blocked.
Clean and/or fi t the fi lter combination correctly.
Clean the spray arm jets. See “Cleaning the Spray
Arms”.
Cloudiness on
glassware
Combination of soft water and
too much detergent.
Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Black or gray marks
on dishes
Aluminum utensils have
rubbed against dishes.
Use a mild abrasive cleaner to eliminate those
marks.
Detergent left in
dispenser cups
Dishes block detergent cups.
Re-loading the dishes properly.
Unsatis
-factory
drying
result
The dishes are not
drying
Improper loading
Load the dishwasher as suggested in the directions.
Too little rinse-aid
Increase the amount of rinse-aid/Refi ll the rinse-aid
dispenser.
Dishes are removed too soon.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam
can escape. Begin unloading the dishwasher only
once t he dishes are barely warm to the touch.
Empty the low basket fi rst. This prevents water form
dropping off dishes in the upper basket.
Wrong programme selection
In short programmes the washing temperature
is lower. This also lowers cleaning performance.
Choose a programme with a long washing time.
Using cutlery with a low-qual-
ity coating
Water drainage is more diffi
cult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
Error Codes
When some malfunctions come on, the appliance will display error codes to warn you:
Codes
Meanings
Possible Causes
E1
Longer inlet time.
Faucets is not opened, or water intake is restricted, or water pressure is
too low.
E4
Overfl ow.
Some element of dishwasher leaks .
WARNING!
≐
If
overfl ow occurs, turn off the main water supply before calling a service.
≐
If there is water in the base pan because of an overfi ll or small leak, the water should be removed before
restarting the dishwasher.
Содержание PDT 671
Страница 1: ...TABLE TOP DISHWASHER USER S MANUAL PDT 671...