EN - 13
Copyright © 2016, Fast ČR, a. s.
08/2016
Adjusting Salt Consumption
Step 1: Enter the status of salt adjustment
Close the door, within 60 seconds after power on, press Start/Pause button and hold for 5 seconds, the machine
will enter setting mode.
Step 2: select a certain level of salt consumption
Press the Start/pause button to select the proper set according to your local environment, the sets will change
in the following sequence: H1->H2->H3->H4->H5->H6;
Step 3: Exit the status of salt adjustment
Without any operation in fi ve seconds, the machine will exit from set mode, the machine is into standby status
There are 6 levels of salt consumption in all. It is recommended to select the level according to below table:
Water Hardness level
Setting on the water softener
Digital display stalls
°dH
1)
mmol/l
2)
0-5
0-0.9
1
H1
6-11
1.0-2.0
2
H2
12-17
2.1-3.0
3
H3
18-22
3.1-4.0
4*
H4
23-34
4.1-6.1
5
H5
35-45
6.2-8.0
6
H6
NOTE:
1) German degree of measurement for the water hardness
2) millimol, internationel unit for water hardness
*) factory
setting
Contact your local water board for information on the hardness of your water supply.
B. Fill the Rinse Aid Dispenser
Rinse Aid Dispenser
The rinse aid is released during the fi nal rinse to prevent water from forming droplets on your dishes. That
can leave spots and streaks. It also improves drying by allowing water to sheet off the dishes. Your dishwasher
is designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent
dispenser. To fi ll the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator
turns completely black.
The volume of the rinse aid container is about 110ml.
Содержание PDT 671
Страница 1: ...TABLE TOP DISHWASHER USER S MANUAL PDT 671...
