EN - 22
Copyright © 2016, Fast ČR, a. s.
08/2016
*EN 50242: This programme is the test cycle. The information for comparability test in accordance with EN
50242, as follows:
≐
Capacity: 6 setting
≐
Rinse aid setting: 6
≐
The power consumption of off -mode is 0.45W
left-on mode is 0.49W
Turning On the Appliance
Starting a wash cycle...
Draw out the basket (see the section entitled “Loading the Dishwasher”).
Pour in the detergent (see the section entitled “Salt, Detergent and Rinse Aid”).
Insert the plug into the socket. The power supply is 220-240 VAC 50 HZ, the specifi cation of the socket is
10 A 250 VAC.
Make sure that the water supply is turned on to full pressure.
Press the program button , the wash program will be changed as follows direction
ECO->Glass->90 min->Rapid->Self-Cleaning->Intensive->Normal;
If a program is selected, the response light will light. Then press the Start/Pause button, the dishwasher begins
to start.
NOTE:
When you press the Start/Pause button to pause during washing, the program light will stop blinking and the
dishwasher will mooing every minute unless you press the Start/Pause button to start.
Change the Programme...
Premise: You can modify the washing program, When the dishwasher just runs for a short time. Otherwise, the
detergent may have already been released, and the appliance may have already drained the wash water. If this
is the case, the detergent dispenser must be refi lled (see the section entitled “Loading the Detergent”).
Press Start/Pause Button to pause the machine when the door is closed ,Press Program Button more than three
seconds the machine will be in stand by state , then you can change the program to the desired cycle setting
(see the section entitled “Starting a wash cycle...”).
If you open the door during washing, the machine will pause. When you close the door and press the Start/
Pause Button, the machine will keep on working after 10 seconds.
The program lights show the state of the dishwasher:
a) One of the program lights on
stand by or pause
b) One of the program lights blinking
run
NOTE:
If you open the door when washing, the machine will pause. When you close the door, the machine will keep
on working after 10 seconds.
If your model has broken remember function, the machine will go on to fi nish the selected program after the
power cut.
Содержание PDT 671
Страница 1: ...TABLE TOP DISHWASHER USER S MANUAL PDT 671...
