Philco PDR 1592 BIT, Руководство пользователя

Страница: 14 / 108

EN - 12
05/2013 Copyright © 2013, Fast ČR, a. s.
Identifying water hardness
The dish washing effi ciency of your dishwasher depends on the hardness of the water used. Therefore, your
dishwasher is equipped with a system which reduces water hardness at the main water inlet. The better the
system is set up the better the achieved washing effi
ciency. Your water supplier should provide you with
information about water hardness in your area or you may measure it yourself using a simple harness test,
a special testing strip (not included).
Take the
testing
strip out
of the
packaging. Allow your
tap water
to fl ow
over the
strip for
approxi-
mately
1 minute. Leave the
testing strip
dipped in
the water
for approxi-
mately
1 second. Take it out of
the water and
tap it. Wait
approxi-
mately
1 minute
for the
result. Compare the hardness value on the
strip to the hardness table supplied
with the testing strip.
1
minute
1
second
1
minute
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
No Lime
Very low lime content
Low lime content
Medium lime content
Lime content
High lime content
Setting salt consumption
The dishwasher is designed to enable the adjustment of salt consumption on the basis of the hardness of the
water used. This should optimise and adapt the level of salt consumption.
Table for setting up water hardness
Water hardness
level dH
(German unit) dF
(French unit) dE
(English unit) Water hardness setting
indicator
1 0 – 5 0 – 9 0 – 6 L1 will appear on the display
2 6 – 11 10 – 20 7 – 14 L2 will appear on the display
3 12 – 17 21 – 30 15 – 21 L3 will appear on the display
4 18 – 22 31 – 40 22 – 28 L4 will appear on the display
5 23 – 31 41 – 55 29 – 39 L5 will appear on the display
6 32 – 50 56 – 90 40 – 63 L6 will appear on the display
1. Press and hold down the program button.
2. Meanwhile press the ON/OFF button.
3. Hold down the program button until the „SL“ displayed on the screen disappears. Then release the program
button.
4. The previously set water hardness level will be shown (salt consumption).
5. Repeatedly press the program button to set the water hardness level.
6. To
confi rm and save into the dishwasher‘s memory press the ON / OFF button.
NOTE:
Your water supplier will provide you with information about the hardness of your water.
CAUTION!
If your dishwasher does not have a water softening system, you can skip this chapter.