Philco PDR 1592 BIT, Руководство пользователя

Страница: 13 / 108

EN - 11
05/2013 Copyright © 2013, Fast ČR, a. s.
8. Salt warning indicator light: It will light up if salt needs to be refi lled.
Rinsing aid warning indicator light: It will light up if rinsing aid needs to be refi lled.
The warning indicator lights will turn off during the washing cycle or when using 3-in-1 tablets even if the
amount is insuffi
cient.
9. End of washing cycle indicator: indicates the end of a washing cycle.
NOTE:
The washing program that was set previously will remain in the dishwasher‘s memory. Before turning on
the dishwasher again, check that you have selected the correct washing program.
Before fi rst use
Before you put your dishwasher into operation:
a) set water softening;
b) pour 3/4 litre of water into the salt compartment and fi ll it up with salt;
c) fi ll the rinsing aid compartment;
d) fi ll the dishwashing detergent compartment.
Water softener
The water softener is made so that it releases minerals and salts contained in water, which would have
a negative eff ect on the operation of the dishwasher. The higher the content of these minerals and salts, the
harder the water is. You should set the water softener according to the water hardness in your area. Information
about water hardness in your area should be provided by your water supply company.
If you use hard water in your dishwasher, scale deposits will be left on your dishes, which may negatively aff ect
the washing effi
ciency and lifetime of your dishwasher.
The appliance should be equipped with a special softener, which uses the salt compartment for salt specifi cally
designed for eliminating scale and minerals from water.