Philco PD 1070 BiX, Руководство пользователя

Страница: 14 / 116

EN - 12
08/2012 Copyright © 2012, Fast ČR, a. s.
PART 4: CONTROL PANEL
Control panel
1. 2. 3. 4. 5. 6. 7. 8.
1. ON/OFF switch: turn the appliance on / off . After turning on, the „end“ of Program indicator light will come
on.
2. Display: display the washing cycle type and time remaining until the end of the selected washing
program.
3. Program button: select the desired program.
4. Delayed start button: press repeatedly to delay the start by 1 to 19 hours. In order to activate the delayed
start function it is necessary to select a washing program. If you need to change the delayed start time,
repeatedly press the delayed start button. The most recently set value will apply.
5. Tablet button: use this if you are using 3-in-1 tablets containing washing detergent, salt, rinsing aid.
6. Pre-wash button: use this for heavily soiled dishes to improve the washing cycle results. The temperature
and duration of the washing cycle will change.
NOTE:
If you select the pre-wash for a program for which the pre-wash is not compatible, a warning sound
will be made.
NOTE:
Note: If you want to set only the pre-wash program, then select pre-wash using the the program
button.
7. Half dish load button: by using the half dish load function you can reduce the washing cycle time and
reduce water and electricity consumption. You can select from three types of programs:
a) If you have half a dishwasher load and the dishes are located in both the racks, press this button
and select the options where both the indicator lights are lit (see the icon at the beginning
of paragraph a)).
b) If you put in half a dishwasher load only into the upper rack, press this button repeatedly until
only the top indicator light is lit (see icon at the beginning of paragraph b)).
c) If you put in half a dishwasher load only into the lower rack, press this button repeatedly until
only the bottom indicator light is lit (see icon at the beginning of paragraph c)).