Philco PCF 1002 i, Руководство пользователя, Страница: 14 / 18

EN - 12
10/2016 Copyright © 2016, Fast ČR, a. s.

Do not allow such substances to come into contact the appliance parts.

Do not use any abrasive cleaners

Remove the food from the freezer. Store them in a cool place, well covered.

Switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker
of fuse.

Clean the appliance and the interior accessories with a cloth and lukewarm water. After cleaning wipe with
fresh water and rub dry.

Accumulation of dust at the condenser increases energy consumption. For this reason carefully clean the
condenser at the back of the appliance once a year with a soft brush or a vacuum cleaner.1)

After everything is dry place appliance back into service.
1) If the condenser is at back of appliance.
Defrosting of the freezer
The freezer, however, will become progressively covered with frost. This should be removed.
Never use sharp metal tools to scrape off frost from the evaporator as you could damage it.
However, when the ice becomes very thick on the inner liner, complete defrosting should be carried out as
fellows:

Unplug the unit. Remove the drain plug from the inside of the freezer. Defrosting usually takes a few hours.
To defrost faster keep the freezer door open.

For draining, place a tray beneath the outer drain plug. Pull out the drain dial.
Hole

Rotate the drain dial 180 degree. This will let the water fl ow out in the tray. When done, push the drain dial
in. Replug the drain plug inside the freezer compartment. Note: monitor the container under the drain to
avoid overfl ow.

Wipe the interior of the freezer and replace the electrical plug in the electrical outlet.

Reset the temperature control to the desired setting.