Philco PC 1652, Руководство пользователя

Страница: 19 / 33

Copyright © 2019, Fast ČR, a. s. Revision 04/2019
EN - 17
10. Move the lower door and adjust its position to align lower hole site and upper hinge axis. Turn the
middle hinge by 180, adjust the middle hinge to the appropriate position and then install it.
11. Screw out the upper hinge axis, turn the upper hinge over and fix axis on it. Then place it at side for use.
12. Remove the screw hole cover
1
, then install it to the right side
2
, as shown in figure below.
13. Move the upper door to appropriate position, adjust part
1
and upper door, and then fix part
1
by
screws
2
(Please hold upper door by hand when installing) , and then install another part
3
(in the
plastic bag).
NOTE:
When installing part
3
, firstly, push it from left to right completely, then push it down tight.
14. Open the upper door, mount door racks and then close it.