Philco CleanAir 40, Руководство пользователя

Страница: 19 / 21

5. Particle Sensor (Every 2 months)
Replacing the filters
cotton swab
Snap Joints
fig 1 fig 2
·
With a dry cotton swab and regular cleaning the lens to remove the moisture and smoke, remove the
outer cover of particle sensor(fig 1), use the dry cotton swab to clean the lens (fig 2).
·
Please ensure to disconnect the power before cleaning.
·
Irradiated with light when it
can’t see clearly.
Tips
· Ensure to disconnect the power before cleaning and maintenance
· Do not open the machine when it removes the filter
·
Please unplug power if the machine is not in use in long time
· According to the use of places and methods (e.g. The family with many of smokers or the
place with serious pollution), the filter life will be shortened. Please replace the filter in time.
A B C D
A. Press the middle of front panel to make the upper button out of its position.
B. Pull out the front panel
C. Take out the filters one by one
D. Fill in new filters one by one in a correct consequence
1. Pre-Filter
2. Highly effective active carbon filter/Cold Catalyst
Filter
3. Antibacterial / HEPA Filter
3 2 1
·
Suggest to maintain No.1 filter in every 15 days
·
Suggest to maintain No.2 and No.3 filters in every 60 days
·
Suggest to replace No.1 filter in every 2 years
·
Suggest to replace No.2 & No.3 filter in every 6 moths
Filter change reminding reset
The machine has filter change reminding function. It’s set at 1500 hours. Please replace No.2 and No. 3 filter
when “change” icon light up. Also please press the child lock button for 5 seconds to reset this function.
14 15