Philco CleanAir 40, Руководство пользователя

Страница: 16 / 21

Function Descriptions Installation Notice
3. Remote Control
The product is equipped with remote control, use the button cell
(If don’t use the remote
control for a long time, please take out the battery)
Note: The buttons on the remote control, the corresponding buttons on the operation panel,
function and operation method are exactly the same,
4. Product use
·
Intelligent operation, the machine under the status of the power supply is connected, press the power button,
and the smart key, the machine can run under the sensor intelligent induction. The operation of the motor gear
will follow sensors adjusted value. This operation can use the vast majority of applications.
·
Enforce running, the machine under the status of the power supply is connected, press the power button,
key selection according to wind speed motor gear. In this mode cannot be automatically shift machine.
·
The above two kinds of operating modes when it runs at night, as long as the sleep button is automatically
in the purification of a machine, to ensure that no noise, will not effect your rest.
·
In the above operation modes, simply press timer, the setting of the machine running time, it will run the
countdown, will stop running automatically after the times out.(If needs to cancel the timing, long press time 3
seconds to cancel this function.)
·
Child lock mode, as long as you press the Child lock button, the control panel and buttons on the remote
control can not work.(Long press 3 seconds locked to lift or press the unlock button on the remote control)
Radio equipment features
Standard IEEE 802.11b/g/n(1-14)
Antenna type PCB Anstenna: 3dBi
U.FL Antenna Connector: 3 dBi
Operational temperature -20
℃
to 85
℃
WiFi Frequency 2.412~2.484GHz
Bluetooth version none
Maximum transmission
power 802.11b:17.52dBm
Operating humidity
＜
70%RH
Input power VDD*0.1to VDD*0.8
Hereby LOZOS SA indicates that the radio equipment of the device
complies with Directive 2014/53/EU (RED). The full text of the EU Declaration of
Conformity is available on the following website: https://www.philco.gr/declarations
08
1. Do not place on the following places
·
Direct sunlight or facing outlet of air condition, Heated place. (May
cause deformation, deterioration, discoloration and malfunction.)
·
Televisions and radios and other equipment nearby. (Images may
cause disorder and noise, remote control machine, disruption to
television and radio, please put more than 1meter away.)
2. In view of the pollen and other indoor dust, this product should be placed on the ground.
·
Pollen, dust and other easily fall near the floor, it is recommended that the product be
placed on a flat ground in the room.
3. In order to make effective air circulation in the room
.
·
There should be a gap of at least 20cm at both sides and back of the
product, while 30cm from the top surface.
4. Do not place anything on the product .
(Otherwise may cause malfunction)
·
Special Notice: Do not place magnets and metal object.
5. Do not block the air inlet and outlet.
·
For example, do not place anything on the outlet or front air inlet.
09
air outlet
air intlet
1m
Sunshine