Philco CleanAir 40, Руководство пользователя

Страница: 15 / 21

Replace
Control overview
Wi Fi
Press WiFi/filter reset button for 5 seconds until the LED blinks quickly and follow the
instructions below for connecting the app.
UV STERILIZE
POW ER
EXIT 3S EXIT 3S
AUTO SPEED SL EEP
Control Panel
3. Switch on
Display Panel
TIMER IONIZER CHILD LO CK
Control Panel
AUTO
Unit will enter into auto mode at start. Under this mode, according to the degree of air
pollution, automatic to start work, air volume automatically adjusts. In AUTO mode, PM2.5
corresponds to the corresponding table of air quality and gear position in the intelligent
mode of speed: 1~100 = green light = excellent air quality = first gear
101~200 = yellow light = good air quality = second gear
201~500 = red light = poor air quality = third gear
POWER
1. After plugging in the power, you will hear a sound
“Di”, the machine
enters standby mode, and the air quality indicator will show red color.
After the power is turned on, the air quality indicator light is completely red,
the machine enters the automatic mode.
SLEEP
The display panel and light will turn off when sleep mode start. Motor only work at low
speed. Timer is available at this mode. Machine will at standby mode after the time setting
finish. Press any button to exit sleep mode.
4. Select the operating mode
SPEED
Press the wind speed button to change the speed of the motor. It is divided
into first gear, second gear, third gear, sleep, AUTO. When pressed, the
machine increases one gear from the current gear position, and then returns
to the automatic mode. files.
CHILD LOCK
IONIZER
TIMER
When the child lock button is pressed, the button function of the machine
enters the locked state, and all the buttons cannot be operated. Long Press
this button for 3 seconds to unlock.
Ionizer will be on when unit starts operation. It can be switched off from the WiFi app.
The machine's working time can be set by the timer button while the machine
is running. Set the time to 1 hour, 2 hours, 4 hours, 8 hours, press again to
turn off, the corresponding indicator lights after the selected time.
RESET
5. Power Off
POWER
This unit is equipped with a timing change filter function, which will flash
until the 1500 hour filter replacement prompt. Press and hold the reset
button for 5 seconds to clear the filter indicator and reset the timing
function..
When the power is on, touch the “Power” button on the operation, and the
machine enters the standby state. (The icon light is on when the machine
enters the standby state).
06
07