Philadelphia Solar PS-M60 Series, Инструкция по установке и эксплуатации

Страница: 9 / 17

QP-10-IM21UL/Rev 12
Diffused horizontal irradiance
• Installation height of bifacial module
is recommended to be higher than 1
meter in order to harvest maximum
available reflected and diffused
radiation and to reduce shading on the
backside.
• Structure, cables and any other
component of installation should not
cause shading on the backside of the
modules.
TILT ANGLE:
The tilt angle of the PV module is the measured between the PV module and a
horizontal ground surface. The PV module generates the maximum output power
when it faces the sun directly. 5 degrees or more is recommended for the tilt angle of
the PV module for the maintenance.
For the stand alone systems with a battery where the PV modules are attached to a
permanent structure, the tilt angle of the PV modules should be determined to
optimize the performance when the sunlight is the scarcest, In general, if the electric
power generation is adequate when the sunlight is the scarcest, then the angle
chosen should be adequate during the rest of the year. For Grid-connected
installations where the PV modules are attached to a permanent structure, it is
recommended to tilt the PV module at the angle equal to the latitude of the
installation site so that the power generation from the PV module will be optimum
throughout the year.
Artificially concentrated sunlight shall not be directed to the panel, or module.