Philadelphia Solar PS-M60 Series, Инструкция по установке и эксплуатации

Страница: 8 / 17

QP-10-IM21UL/Rev 12
• Do not work alone and work as a team.
• Wear a safety belt if working far above the ground.
• Do not wear metallic jewelry which can cause electric shock during installation.
• Do not damage the back sheet of PV modules when fastening the PV modules to a
support by bolts.
• Do not damage the surrounding PV modules or mounting structure when replacing
a PV module.
• Bind cables by the installation locks. Drooping down of cables from the terminal box
could possibly cause various problems such as animal biting, electricity leakage in
puddle.
• Take proper measures for preventing the laminate (consisted of resin, cells, and
glass, back sheet …etc.) from dropping out of the frame in case the glass is broken.
• Cables shall be located so that they will not be exposed to direct sunlight after
installation to prevent degradation of cables.
SITE SELECTION:
In most applications, the PV modules should be installed in a location where there is
no shading throughout the year. The PV panels face south In the Northern
Hemisphere.
Please make sure that there are no obstructions in the surroundings of the site of
installation. Take proper steps in order to maintain reliability and safety, in case the
PV modules are used in areas such as: Heavy snow areas/Extremely cold
areas/strong wind areas/installation over, or near, water/Areas where installations
are prone to saltwater damage/small islands or desert areas.
Lightning protection is recommended for PV systems that are to be installed in
locations with high probability of lightning strikes.
For Bifacial Modules:
• The energy output of bifacial module can be affected by albedo of the ground
that module installed on, height of module, Ground coverage Ratio (GCR), and