Copyright @ 2014 Phicomm Europe GmbH 2014. Print for private use only.
19
GENERAL PRECAUTIONS
AVOID APPLYING EXCESSIVE PRESSURE TO THE DEVICE
Do not apply excessive pressure on the screen and the device to
prevent damaging them and causing cracked display of the touch
screens. Do not put the device in your pants’ pocket for a
prolonged period of time.
DEVICE IS GETTING WARM AFTER PROLONGED USE
When using your device for prolonged periods of time, such as
when you’re talking on the phone, charging the battery or
browsing the web, the device may become warm. In most cases,
this condition is normal and therefore should not be interpreted
as a problem with the device.
HEED SERVICE MARKING
Except as explained elsewhere in the Operating or Service
documentation, do not repair any product yourself. Service
needed on components inside the device should be done by an
authorized service outlet or provider.
PHICOMM is entitled to use new or reconditioned replacements
parts or boards for repairs under warranty, provided they have
the same functionality as the parts to be replaced.
DAMAGE REQUIRING SERVICE
Unplug the product from the electrical outlet and refer servicing
to an authorized service center or provider under the following
conditions:
Liquid has been spilled or an object has fallen onto the
product.
The product has been exposed to rain or water.
There are noticeable signs of overheating.
The product does not operate normally when you follow the
operating instructions.
AVOID HOT AREAS
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
Copyright @ 2014 Phicomm Europe GmbH 2014. Print for private use only.
20
20
20
AVOID WET AREAS
Never use the product in a wet location.
AVOID USING YOUR DEVICE AFTER A DRAMATIC CHANGE IN
TEMPERATURE
When you move your device between environments with very
different temperature and/or humidity ranges, condensation may
form on or within the device. To avoid damaging the device, allow
sufficient time for the moisture to evaporate before using the
device.
NOTICE:
When taking the device from low-temperature
conditions into a warmer environment or from
high-temperature conditions into a cooler environment,
allow the device to acclimate to room temperature before turning
on power.
AVOID PUSHING OBJECTS INTO THE DEVICE
Never push objects of any kind into cabinet slots or other
openings in the product. Slots and openings are provided for
ventilation. These openings must not be blocked or covered.
MOUNTING ACCESSORIES
Do not use the product on an unstable table, cart, stand, tripod,
or bracket. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
AVOID UNSTABLE MOUNTING
Do not place the product with an unstable base.
USE PRODUCT WITH APPROVED EQUIPMENT
This product should be used only with personal computers and
options identified as suitable for use with your equipment.
ADJUST THE VOLUME
Turn down the volume before using head-phones or other audio
devices.