J
G
H
I
D
I
K
Figure 6
Figure 7
Figure 8
BB
DD
CC
D
N
ASSEMBLY INSTRUCTIONS
8
6. Attach gas cylinder support (K) to back-left leg (I) and back-right leg (J) and front-left leg (H) and front-right leg (G) with bolts (BB) and
washer (CC) using hex screw driver (DD), (see Figure 6).
8. Attach the door handle (N) to the door panel (D) with the bolt (EE) using a Phillips screwdriver (NOT included), (see Figure 8).
7. With the help of another person, carefully turn the fire pit to the upright position. Attach the door panel (D) to the back-left leg (I) by
aligning the hinge on the door panel with those on the back-left leg (I) and inserting the pins in the hinges, (see Figure 7).
Hardware Used
BB Bolts (M6 x 25) x 4
CC Washer (M6) x 4
DD Hex screw driver x 1
NOTE:
Tighten all screws completely.
Hardware Used
EE Bolts (M4 x 10) x 1
LIFE GETS BETTER WITH PHI VILLA
