PheeNet WLn-501, Руководство пользователя

Страница: 41 / 74

40
modify default value if you don’t know what it is,
default value is 100
DTIM Period Set the DTIM period of wireless radio. Do not
modify default value if you don’t know what it is,
default value is 3
Data Rate Set the wireless data transfer rate to a certain
value. Since most of wireless devices will negotiate
with each other and pick a proper data transfer
rate automatically,
it’s not necessary to change
this value unless you know what will happen after
modification.
N Data Rate Set the data rate of 802.11 Draft-N clients,
available options are MCS 0 to MCS 15, it’s safe to
set this option to ‘Auto’ and
it’s not necessary to
change this value unless you know what will
happen after modification.
Channel Width Select wireless channel width (bandwidth taken by
wireless signals of this access point). It’s suggested
to select ‘Auto 20/40MHz’. Do not change to ’20
MHz’ unless you know what it is.
Preamble Type Set the type of preamble of wireless radio, Do not
modify default value if you don’t know what it is,
default setting is ‘Short Preamble’.
Broadcast ESSID Decide if the wireless access point will broadcast
its own ESSID or not. You can hide the ESSID of
your wireless access point (set the option to
‘Disable’), so only people those who know the
ESSID of your wireless access point can get
connected.
CTS Protect Enabling this setting will reduce the chance of
radio signal collisions between 802.11b and
802.11g wireless access points. It’s recommended
to set this option to ‘Auto’ or ‘Always’. However, if
you set to ‘None’, your wireless access point
should be able to work fine, too.
Tx Power You can set the output power of wireless radio.
Unless you’re using this wireless access point in a
really big space, you may not have to set output