PheeNet WLn-501, Руководство пользователя

Страница: 39 / 74

38
Passphrase Key: Displays the WPA passphrase
here, all characters will be replaced by asterisk for
security reason. If encryption is not set on this
access point, nothing will be displayed here.
Start PBC Click this button to start PBC type WPS setup
(PBC stands for ‘Push Button Configuration’
Start PIN Click this button to start PIN type WPS setup, the
PIN number of
wireless client must be inputted in
the field located at the left of ‘Start PIN’ button.
This access point also provides a hardware PBC button for WPS setup.
You can press and hold ‘Reset/WPS’ button for 2 seconds to use PBC
type WPS setup, the hardware button’s function is the same as ‘Start
PBC’ software button described above.
Do not press and hold
‘Reset/WPS’ button for longer than 20 seconds, or this will reset the
access point and remove all settings inside!
NOTE: When you’re using PBC type WPS setup, you must press
‘PBC’ button (hardware or software) of wireless client within 90
seconds; if you didn’t press PBC button of wireless client within
this time period, please press ‘PBC’ button (hardware or software)
of this access point again.