PheeNet WLn-501, Руководство пользователя

Страница: 12 / 74

11
Chapter II: System and Network Setup
2-1 Setup Network Connection between Wireless Access Point and your
Computer.
Please follow the following instruction to build the network connection
between your new wireless access point and your computers, network
devices:
1.
Connect all your computers, network devices (network-enabled
consumer devices other than computers, like game console, or switch /
hub) to the LAN port of the access point by Ethernet cable.
2.
Connect the A/C power adapter to the wall socket, and then connect it
to the ‘Power’ socket of the access point.
3.
Please check all LEDs on the front panel. ‘PWR’ LED should be
steadily on, LAN LEDs should be on if the computer / network device
connected to the respective port of the access point is powered on and
correctly connected. If PWD LED is not on, or any LED you expected
is not on, please recheck the cabling, or jump to
‘4-2 Troubleshooting’
for possible reasons and solution.