Setup In Hotspot Mode
Step 0 : Access to WAS-103R
The default VLAN IP Address is between
192.168.100.1 to 192.168.107.1 and the IP
Netmask is 255.255.255.0
The administrator's PC need support VLAN.
Set VLAN ID 100 and set IP address
automatically. The administrator PC's will be
get IP address 192.168.100.xx (More VLAN
Setting see User Manual)
Open Browser and enter
http:192.168.100.1
to access WMI of WAS-103R
The switches deployed under WAS-103R
must support VLAN or VLAN Passthrough
Step 1 : Mode Confirmation
Ensure the Operating Mode is currently at Hotspot
mode; the web management UI can be viewed at
the
Status
section under the
System Overview
page.
Step 2 : Change Password
Click
System -> Management
and then
Admin
Configuration
page appears.
Enter a new administrator's password in the
New
Password
field, and re-enter it again in the
Check
New
Password
(a maximum of 32 characters and no
space allowed).
Click
Save
button to save the settings.
For security concern, it is strongly
recommended to change the
administrator's password
Step 3 : WAN Interface
Click
System -> WAN
and then
WAN Setup
page
appears.
Select a proper type of Internet Connection Type for
WAN Interface from the following three available
connections:
Static
IP
,
Dynamic
IP
, or
PPPoE
.
Your ISP or network administrator can advise on the
connection type available to you. Below depicts an
example for
Static
IP
. Click
Save
button to save
the settings.
