9
RENAMING A SOURCE DEVICE
Click on the
display icon, enter a new name and click on Save Changes. This name is used by Voice Services
when controlling specific sinks- be careful when naming these if you intend to use voice control to make sure they
are pronounceable.
Names must be 13 characters or less and cannot be blank, start with or end with a space, certain special characters are
also not allowed. Custom names are displayed in the source menu in a CEC enabled TV* and used for voice services.
*where supported.
CONFIGURING NETWORK SETTINGS
By default, the matrix is set to retrieve an IP address via DHCP, you must connect the system to a router or server
that has DHCP enabled. Once initially configured you can modify this setting and switch to a static IP address.
You must ensure that the new settings are correct before saving them as you will no longer be able to access the
matrix if they are incorrect. In order for the internet based functions to operate such as the cloud based monitoring
and gotomymatrix.com facility you must provide at least one valid DNS address. We recommend using the Google
Public DNS address 8.8.8.8 for Primary DNS and 8.8.4.4 for Secondary DNS
DIAGNOSTICS & SETTINGS
Within the web interface you can also check the hardware health under the
System Health
tab. Here you will
find the system status, power, connectivity and temperature. You will also find a HDBaseT link quality test which
will indicate if the HDBaseT link is stable over a sustained period of time.
Under the
Routing Control
tab you will find useful options to create custom IR profiles and disable HDMI-CEC
support. Backlight options for the front LEDs can be accessed under the
Front Panel
tab.
Additional setup information can be found under 'Documentation & Guides' on the installer monitoring portal.
