88
6.7 RS-232 & Telnet Commands
Command
Description
A1~A8
Switch Output A to 1~8
B1~B8
Switch Output B to 1~8
C1~C8
Switch Output C to 1~8
D1~D8
Switch Output D to 1~8
E1~E8
Switch Output E to 1~8
F1~F8
Switch Output F to 1~8
G1~G8
Switch Output G to 1~8
H1~H8
Switch Output H to 1~8
ABCD...1~ABCD...8
Switch Output A B C D... to 1~8 at the
same time
SETIP <IP> <SubNet> <GW>
Setting IP. SubNet. GateWay (Static IP)
RSTIP
IP Confi guration Was Reset To Factory
Defaults <DHCP>
IPCONFIG
Display the current IP confi g
P0
Power OFF
P1
Power ON
I1~I8
Switch all the Output to 1~8
ST
Display the current matrix status and F/
W version
RS
System Reset to A1, B2, C3, D4, E5, F6,
G7, H8
EM
Setting EDID MODE. 1-STD 2-TV
?
Display all the available commands
Quit
Exit(for telnet only)
Note: Any commands will not be executed unless followed by a
carriage return. Commands are case insensitive.
